Home -> Home & Garden -> Tankless Hot Water Heaters -> Electric Tankless Water Heaters -> Electric Tankless (instant, on demand) Hot Water Heater, Shower

Electric Tankless (instant, on demand) Hot Water Heater, Shower

+1
25%
 
Market price: $249.00
Our price: $185.95 (139.46)
Quantity


FOR EXPORT ONLY

Hot water only when you need it... at the temperature of your choice. Save energy, save water and save on overall cost.

The Ecosmart Electric Tankless Hot Water Heater for Shower comes complete with mounting hardware, showerhead, controls, and no extra cost on valves. It features a ready to mount and use system designed for single shower application. This on-demand hot water heater consumes energy only when hot water is used.

No standby heat loss. No long pipe runs. No additional hot water lines when you install at your current shower.


Compact, Elegant, Safe and Economical

The ECO DSK 5.5 is the best single-shower tankless water heater available in the market today. Perfect for homes, boats, pool areas and many more.

Before placing an order, please make sure that your home has sufficient electrical capacity for your preferred model, and that you have noted possible upgrade requirements.

The chart below shows temperature rise at different flow rates. To determine the outlet temperature, simply add your incoming water temperature, plus the temperature rise based on your desired flow rate. Example: desired flow rate = 1 GPM (inlet temperature 70°F + 37.4°F temperature rise for ECO DSK 5.5 = 107.4°F outlet temperature).
Flow Rate (GPM) ECO DSK 5.5 TEMPERATURE RISE
1.0 GPM 37.4
1.5 GPM 24.9
2.0 GPM 18.7

 Specifications

Voltage single phase 220V
ECO DSK-5.5 5.5 KW 25A
HZ 50/60
Tubing 1/2"
Dimensions 14 1/2"x 11"x 3 3/4"
Includes Connection cable, flow valve, hand held massage showerhead, soap dish, mounting brackets and hose.
Protection Digital and built in circuit interrupt
Warranty 5 Years

If you purchase this product, you will need to provide EcoSmart a statement certifying that you will use this product outside the USA only, due to standard electrical code prohibiting the use of this product in wet environments.

How much can you save with ECOSMART's Tankless Water Heaters?

The primary difference between savings associated with storage tank heaters compared to tankless heaters is the amount of energy and time consumed during operation. An electric tankless water heater consumes more energy compared to a tank heater during its use, but it consumes energy for a drastically shorter period of time. The result is a reduction in water heating costs by up to 60%.

The image below contains a visual representation of the concept mentioned above using data taken from independent third party testers. It shows how the storage tank heater keeps drawing power even after the need for hot water has long ceased. In this example, the tank heater used energy for 34.5 minutes just for a 10-minute shower. It also used a total of 2.5 kWh, in comparison to the ECO 27 which consumed just 1.6 kWh. The steadiness in the data represented about the ECO 27 is also an accurate indication of how precise the Self-Modulating Technology is, allowing for very minimal differences in energy consumption.

Ecosmart power savings

PSC (Product Safety Consulting, Inc.) is a product testing firm recognized internationally and accredited by several reputable organizations. PSC administered numerous tests that simulate daily hot water usage and then compared the energy consumption results between an ECO 27, the largest model available from ECOSMART, and a 40 gallon water heater from Rheem. Based on an average ten-minute shower consuming two gallons per minute, a 37% savings in energy consumption was confirmed with the ECO 27.  This figure is based on usage comparison and does not take into account energy loss associated with Cycling Loss and Standby-by Loss which may be accountable for up to 20% energy loss. This loss included, the ECO 27 uses up to 57% less energy compared to a standard electric storage tank water heater.

Summary: ECOSMART Testing Data

Testing by Product Safety Consulting, Inc.

Assumptions:
  »  Inlet temp of 67 °F
  » Cost of $0.08 per KWH

ECOSMART Tankles vs. Traditional 40 Gallon Tank Result

ECOSMART units don't require preheating

Preheating time requirement = 0 minutes
Preheating energy consumption = 0 KWH
Preheating cost = $0.00

Test #1: Tank Heater Preheat

Preheating time requirement = 93 minutes
Preheating energy consumption = 6.45 KWH
Preheating cost = $0.51

Savings:
$0.51 (100%)

Test #2: Ten Minute Shower at 1.75 GPM at 105°F

Energy Draw Time = 10 min
Recovery Time = 0 min
Total Draw Time = 10 min
Energy Consumption = 1.6 KWH
Energy Consumption Cost = $0.128

Test #2: Ten Minute Shower at 1.75 GPM at 105°F

Energy Draw Time = 6.5 min
Recovery Time = 25.5 min
Total Draw Time = 34.5 min
Energy Consumption = 2.5 KWH
Energy Consumption Cost = $0.20

Savings:
$0.072 (36%)

Test #3: Ten Minute Shower at 2.0 GPM at 105°

Energy Draw Time = 10 min
Recovery Time = 0 min
Total Draw Time = 10 min
Energy Consumption = 1.95 KWH
Energy Consumption Cost =  $0.156

Test #3: Ten Minute Shower at 2.0 GPM at 105°

Energy Draw Time =  6.5 min
Recovery Time = 36.75 min
Total Draw Time = 42 min
Energy Consumption = 3.11 KWH
Energy Consumption Cost = $0.248

Savings:
$0.092 (37%) 

Test #4: Twenty Minute Bath Tub at 3.0 GPM at 105°

Energy Draw Time =  20 min
Recovery Time = 0 min
Total Draw Time = 20 min
Energy Consumption = 5.32 KWH
Energy Consumption Cost = $0.425

Note: The ECO 27 was able to fully maintain the target testing temperature throughout the test

Test #4: Twenty Minute Bath Tub at 3.0 GPM at 105°

Energy Draw Time =  17.75 min
Recovery Time = 67.116 min
Total Draw Time = 84 min
Energy Consumption = 6.2 KWH
Energy Consumption Cost = $0.496

Note: Starting at 18 minutes, the tank heater was not able to maintain the target testing temperature

Savings:
$0.071 (14%)

*Plus the ability to continuously have access to hot water.

Test #5: Three Minute Hand Washing at 1.5 GPM at 105°

Total Draw Time = 3 min
Energy Consumption = 5.32 KWH
Energy Consumption Cost = $0.032

Test #5: Three Minute Hand Washing at 1.5 GPM at 105°

Note: The tank heater didn't draw any power during this test based on a 1-person hand washing application. Results with multiple hand washing applications will result in wattage consumption.

 
Cost:
$0.03

This test or report does not take into consideration any additional cost caused by HEAT LOSS from the tank heater which raises the total operating cost of tank heaters by about 20%.

MPN: DSK5.5; UPC: 854920002008
: *
: *
: *
Type the characters you see in the picture:


*
 

Related

Product rating

Customer Reviews